Introduction:
HJG truss type mud scraper adopts reciprocating action to scrape the bottom sludge to one end of the sludge collecting pit for external discharge. It is used for scraping sludge at the bottom of horizontal flow sedimentation tank. One end of the sludge enters into the other end and the other end flows out. There is a slope at the bottom of the tank (about 8 / 1000). The track gauge is generally about 4-25m. When the pool width is large, it can be made into multi pool shared structure. The track gauge of 4-8M is generally single drive.
- - when the upper part is equipped with water surface oil scraping or foam scraping device, the structure and function of gyz type oil scraping and slag scraping machine are very similar, but there are differences.
characteristic:
1. The hinged type scraper arm can automatically scrape in layers without jamming.
2. When variable speed transmission is adopted, the function of quick return can be realized.
3. It can realize PLC automatic operation.
4. With rake lifting function, it can realize load reduction or single mud scraping.
5. When the span is large, the synchronous motor is generally used, and the rail climbing phenomenon will not occur.
6. The scraping plate is equipped with rubber plate and roller, and the scraping is complete and reliable