Sludge dewatering equipment Location:首页 > Product > Sludge dewatering equipment
Sludge hopper

view:2754 times

Contact Message
  • Product introduction
  • Product selection

The sludge hopper is mainly used in the sludge dewatering room to collect and store the dehydrated mud cake in the sludge hopper. When the sludge reaches a certain volume, the valve at the bottom of the sludge hopper is opened by control, and the sludge cake is unloaded to the truck and transported away.
working principle:
There are two doors at the bottom of the sludge hopper. Sludge is collected and discharged by controlling the two doors. The fan-shaped door is controlled by air cylinder or electric push rod.
characteristic:
According to the user's site conditions, the form of sludge hopper is determined to adapt to the sludge cake storage of spiral sludge dehydrator, belt filter press, centrifuge and other dehydrators; the unloading mode can be crocodile valve and plug valve; the driving mode can be electric or pneumatic; the main material is carbon steel epoxy paint anticorrosion, stainless steel SS304 / 316L.

COPYRIGHT:Yangzhou Shangyuan Environmental Protection Technology Co., Ltd Support:Qingrui network ICP:苏ICP备18007246号